Healthy Home Environmental Idaho Falls

Clearing the Air: Understanding Radon Mitigation in Idaho Falls

Radon is a radioactive gas that requires quick and effective mitigation. Prolonged radon exposure can cause serious health problems like lung cancer.

When a testing professional conducts a test and confirms that you have a radon problem, they may recommend several mitigation systems to reduce the indoor radon levels.

That may have prompted you to learn more about radon mitigation before commencing the process. Here is everything you need to know about radon mitigation in Idaho Falls.

What is Radon Mitigation?

Radon mitigation is the process of reducing radon concentrations in a property. The Environmental Protection Agency (EPA) recommends mitigation for homes with radon levels of 4 picocuries per liter/ pCi/L or higher. Since there are no safe radon levels in indoor air, installing a radon mitigation system is the best solution to keep you and your loved ones safe.

Types of Radon Mitigation Systems in Idaho Falls

There are a variety of radon mitigation systems available for property owners in Idaho Falls. That said, the foundation structure of your property determines the radon reduction system you will install.

Here are the most common radon mitigation systems based on the property’s structural design:

Properties with Basements or Slab-on-Grade Foundation

Active Sub-Slab Depressurization

This is one of the standard radon reduction systems available in Idaho Falls. A mitigation expert installs one or more suction pipes through the slab floor to pull radon before it enters the property and redirects it to a vent fan that redistributes into the outdoor environment.

Passive Sub-Slab Suction

This radon system is quite similar to the active mitigation system above; the only difference is that it relies on air currents to redirect radon gas away from a building. When combined with other radon-resistant features, it can prove helpful in reducing radon levels in newly constructed properties.

Sump Pump Suction

A radon mitigation contractor can add a suction pipe to your sump pump in the basement to help mitigate radon.

Block Wall Suction

Inserting a sub-slab suction in the hollow walls draws air, which, in turn, increases pressure on the wall and the ground effectively trapping indoor radon.

Properties With Crawl Spaces

Crawl Space Encapsulation

Crawl space encapsulation is one of the best radon mitigation systems you can utilize to remove radon from your indoor air. It involves air-sealing the entire space with a high-density sheet. A perforated pipe is then installed under the sheet and connected to a radon fan which pulls the gas outdoors.

Crawl Space Ventilation

Alternatively, you can install a vent fan to blow air into the crawlspace or open the vents to dilute the gas beneath the property.

Does Radon Mitigation Work?

Yes. Radon mitigation can effectively reduce radon concentrations in your property. Some radon mitigation systems can bring radon gas levels down by up to 99 percent!

Additionally, the process is quite budget-friendly. The costs may vary from case to case, but the radon mitigation system installation cost typically does not exceed most property repairs.

Contact HHE for Effective Radon Mitigation Services in Idaho Falls

For custom radon mitigation services in Idaho Falls, contact Healthy Home Environmental Services. As your NRPP-certified technicians, we’ll help you install the right radon reduction system, and perform a series of property checks and post-mitigation tests to guarantee the effectiveness of the system. Call us today to schedule a free consultation.

Leave a Comment

Your email address will not be published. Required fields are marked *